If the monitoring seems to take too much CPU on your Android device (resulting in a reduced score in your favorite benchmark), you can remove some monitoring features (battery) and/or reduce the data sending frequency from the settings page. Press the Home button of your Android device, and run your benchmark.After a couple of seconds, your Android device will appear in the monitors list. Start HWMonitor PRO on your PC, open menu Network, Connect and IP address.You can also change the frequency used to send the data, from 1 second up to 20 seconds (5 by default). Check Listening Model in the settings page if it is not (that option is set by default).Note the IP address of the device that appears under or near the device name. Start HWMonitor PRO on your Android device, and click on the local monitor (the first in the list) in order to start the local monitoring.perhaps the correct/latest chipset driver is not installed allowing correct interpretation of all data from assorted MB sensors? (Relying on default detected/installed MS drivers can often give a functioning system, but rarely is the best of everything installed.That combination is particularly convenient if you need to benchmark your Android device, because it allows to use all the advanced features of the Windows versionįor the monitoring of your Android device, such as data recording and graphs generation.

HWMonitor is VERY widely used in the tech and hardware reviewer industry, and this would be the first time I've heard of it being referred to as a 'poor piece of software', quite frankly. Save time trawling through your computer for stats like CPU, motherboard, RAM. If that is the case, other software with identical access to that particular reading (CPUTIN, which does not show on my own Z270 board, obviously) would give the same reading. Speccy gives you detailed information on every piece of hardware in your computer. Any piece of software might have a glitch with a particular chipset to me, unless there was some known issue with an HWMonitor and the X79 chipset (doubtful, as one would suspect the software would have been corrected many years ago,as the X79 board was/is widely used for the last 8 years), it is (in my opinion) more likely a motherboard sensor/sensor path issue (or even a missing sensor that the software has provisions for) itself.

Cpuid hardware monitor download